15 – 250 kVA
Compact Power
Retail units, offices, clinics and small facilities where space is tight and reliability is everything.
- Supply & on-site installation
- Optional acoustic canopy
- ATS / AMF integration
United/Solutions & Products
One power system. Six engineered parts.
Generator supply and installation, locally fabricated acoustic enclosures, control & transfer panels, vibration isolators, fuel systems and exhaust works — engineered around your project, delivered by one team.
15–2500 kVAGenerator supply & installation range
75 dB @ 1 mDeclared for an 800 kVA enclosure build
50,000 LBack-up fuel tank capacity, up to
ATS · AMF · SyncControl & transfer panel types
Acoustic Enclosures
Turn the noise down.
Keep the power on.
Soundproof generator canopies fabricated in our own workshop — insulated, ventilated and sealed for sites where noise matters: hospitals, offices, residential and commercial buildings.
Open generator
[XX] dB(A)
Comparison values are shown once verified test data — load, distance and measuring method — is approved.
High-density rock wool
Insulation core that absorbs engine noise inside the shell.
Multi-layer insulation
Layered build-up around the generator to reduce radiated sound.
Ventilation & filters
Engineered air inlets and outlets keep the set breathing and cool.
Sealed access doors
Tight-closing doors that contain sound and open wide for service.
Rust & corrosion protection
Finish built for outdoor sites — including coastal conditions.
75 dB@ 1 M · 800 KVA
Declared noise level for an 800 kVA enclosure built in our workshop (Aug 2025). Every canopy is engineered to its own project target.
Generator Sets · Supply & Installation
From 15 to 2500 kVA.
Sized to your load.
We supply, install and test generator sets across a 15–2500 kVA range — and integrate them with the enclosure, panel, fuel and exhaust works around them.
Drag to set your required capacity
500kVA
Typical fit
Mid-range power
Hospitals, factories and multi-storey buildings that need dependable standby power.
250 – 1000 kVA
Mid-Range Power
Hospitals, factories and commercial buildings that need dependable standby power with low noise.
- Coordinated canopy & fuel works
- Exhaust lines & cabling
- Testing before handover
1000 – 2500 kVA
Large-Scale Power
Industrial plants, utilities and infrastructure projects built to approved drawings and site conditions.
- Installation to approved drawings
- Acoustic air inlets & outlets
- Diesel feed systems
0kVASmallest set we supply & install
0kVALargest set in our published range
0dB @1mDeclared for an 800 kVA canopy build
[XX]L/hFuel efficiency — per approved datasheet
Control & Transfer Panels
The brain that switches
before you notice.
We manufacture electrical control panels across capacities — automatic transfer (ATS), automatic mains failure (AMF) and synchronizing panels — built and tested around the generator they command.
SourceUTILITY
Bus voltage400 V
Frequency50.0 Hz
Mains
Gen
Load
› System normal — load fed from utility.
Illustrative simulation. Panel ratings, components and protection schemes are specified per project.
Anti-Vibration Isolators
The engine shakes.
The building doesn't.
Spring isolators that sit between the generator and its base — absorbing running vibration before it reaches the slab, the structure and the people inside.
Vibration lab · interactive
Rigid mount — vibration transmitted
Floor vibration
Illustrative — not a measured result.
Published load ratings
0kg
Single-spring isolator, up to
0kg
Double-spring isolator, up to
Ratings as published by United (2019). Contact our technical team for current models, rated loads and application guidance.
kVA alone doesn't choose an isolator.
Selection is reviewed by an engineer against:
- 01Total equipment weight
- 02Load distribution & support points
- 03Base layout & mounting arrangement
- 04Project and site requirements
Fuel Tanks & Diesel Fuel Systems
Follow the fuel —
from tank to engine.
Back-up fuel tanks with capacities of up to 50,000 litres, plus the diesel feed lines that connect them to the generator — installed as part of a complete system.
-
01
Back-up storage
Back-up fuel tanks sized to your run-time needs — with capacities of up to 50,000 litres (50 m³).
Up to 50,000 L -
02
Diesel feed line
Supply piping routed from the storage tank toward the generator set, coordinated with the site layout.
Feed system -
03
Day tank & connection
The fuel system is integrated with the generator and its enclosure, so the set is ready to run when it's needed.
Integrated with the set -
04
Tested before handover
Fuel, exhaust, cabling and protection are checked together during testing before the project is delivered.
System test
0LTank capacity — published maximum 50,000 L
Plan my fuel system
Exhaust, Ventilation & Air Filtration
Let it breathe.
In clean, out safely.
Exhaust lines, ventilation openings, filters and cabling — fitted as part of the generator and enclosure package, so the set stays cool, protected and ready to run.
Air intakeDusty site air
Exhaust lineRouted up & away
Cooling airFiltered & vented
Air inlets & outlets
Acoustic openings that let the set draw and release air without letting the noise out.
Filters
Filtration on the air path to keep site dust away from the engine and its components.
Exhaust lines
Exhaust routing from the engine out of the enclosure and away from occupied areas.
Cabling & protection
Power cables and protections installed and tested as part of the same package.
Delivered as capabilities tied to generator and enclosure projects — not as a stand-alone HVAC service.
We supply and install generator sets across a 15–2500 kVA range. What we fabricate locally are the systems around them — acoustic enclosures, control panels, vibration isolators and fuel tanks. Brands and models are confirmed per project.
Both. You can order an enclosure, a panel, isolators or a fuel tank on their own — or have us coordinate the full system: generator, canopy, panel, fuel, exhaust and cabling, tested together before handover.
It depends on the generator, its load and how and where noise is measured. As a reference, we declared 75 dB at 1 m for an 800 kVA enclosure we built. Each canopy is engineered to its own project target — share yours with us.
Not by kVA alone. We look at total equipment weight, how the load is distributed, the support points and the base layout — then our technical team recommends the model and quantity.
ATS transfers the load between mains and generator. AMF detects a mains failure and starts the generator automatically. Synchronizing panels let several generators run in parallel on one bus. We'll help you pick what fits your site.
We provide back-up fuel tanks with capacities of up to 50,000 litres (50 m³), together with the diesel feed system that connects them to the generator.
The generator brand and model, rated capacity (kVA), equipment weight where relevant, quantity, project location and required delivery date. A photo of the nameplate or a datasheet speeds things up considerably.
Yes — on our installation projects, the generator, fuel, exhaust, cabling and protections are tested before delivery. After-sales support is also available; ask us about the scope for your project.
Request a Quote
Tell us the load.
We'll engineer the rest.
Three short steps. Share what you need, your generator details and how to reach you — our technical team reviews every request against your application.